INTEX Greywood Prism Frame ⌀549*122 Grey

Extra robust frame thanks to oval tubes

The Greywood Prism Frame swimming pool is held upright by the very stable frame. The frame consists of robust oval steel tubes, with powder coating on the outside. The oval shape provides extra strength, even if a dent occurs the pool will not become unstable. The powder coating is extra protection against rust. In addition, this Prism Frame ensures ultimate ease of use: all parts of the pool frame can be clicked together very easily thanks to the Intex Easy Lock System®.

Strong material, with 3 layers

The material in the Prism Frame swimming pools is very strong. This is also necessary for the huge amount of water in the pool. The liner consists of three layers, the middle of which contains a grid pattern. This makes the entire liner very strong and puncture resistant. The thickness of the lining is 0.41 mm on the bottom and 0.64 mm on the side walls. The material is not only resistant to petrol, oil and salt water, but especially to wear and sunlight!

Includes: cartridge filter pump (5,678 l/hour)

With this Greywood Prism Frame swimming pool you get a cartridge filter pool pump. This filter pump filters all dirt from the pool water, even the smallest dirt particles. The dirt remains in the cartridge, a filter that you can rinse clean and replace. This type of pool pump (Intex cartridge filter pump large) filters approximately 5678 liters of water per hour. You should replace the filter cartridge approximately every two weeks. It is therefore advisable to order a number of separate filter cartridges ( type A).

Complete pool in one package

The Prism Frame pool is delivered very complete. You get everything you need to set up the pool and splash in it! In addition to the pool and filter pump, you also get the following accessories:

✔ Ground cloth : place this under the pool to protect the underside of the pool.
✔ Cover : cover the pool after use so that no dirt falls or blows into the water.
✔ Swimming pool ladder : a robust pool ladder, with child-proof anti-slip steps.

Do you want to leave the pool for a whole summer? Then you still need something to maintain the water quality, for example chlorine or a salt water system.

Easy to install, within 60 minutes

The Intex Prism Frame swimming pool is easy and quick to install. The frame parts click together easily, without the need for extra tools or screws. With a little skill, you can assemble the bath in less than 60 minutes and it is ready to be filled with water:

1. Decide where you want to place the pool.
2. Lay out the ground cloth and spread the pool liner on it.
3. Simply click the frame together and slide the frame through the liner.
4. Your pool is ready. Fill it!

At the swimming pool, you will receive a comprehensive manual, with clear explanations on how to set up the swimming pool and what you should pay attention to. If all else fails, there's always a handy video online with step-by-step instructions.

Tip! Talc

At Hygge Hus Möbler, we advise you to use talc when setting up your Prism Frame swimming pool. Komfort pool talcum prevents the pool liner from sticking to the steel frame during the summer. By sprinkling talc in the openings on the lining before you slide the frame in, it will come off easily again after the summer. This makes it extra easy to dismantle and store your pool!