Heat pump COMFORTPOOL EasyHeat 6
Tax included
Shipping calculated at checkout
Description
With Comfortpool EasyHeat 6, you can easily heat the pool water to a comfortable temperature. A compact heat pump model that is above all very easy to use: easy to connect, easy to set up and easy to use! The EasyHeat 6 heat pump is perfect for swimming pools from 12,000 to 35,000 liters and already works at an outdoor temperature of 10°C. With the Comfortpool EasyHeat heat pump, you can easily enjoy a wonderfully heated pool in your own backyard, even during the less beautiful summer days.
When it comes to pool heating, a heat pump is the best method: energy efficient and with the highest efficiency. A heat pump heats the water and then keeps it at a constant temperature (when the filter pump is on). That way, the water is always nice and warm when you want to take a dip. The Comfortpool heat pumps are equipped with a high-quality titanium heat exchanger and are therefore resistant to prolonged exposure to (salty) pool water. The efficient screw compressor and low-noise fan motor ensure quiet operation.
- Very easy to connect
- Simple operation via display
- Perfect for smaller pools
- Compact model
- Efficient pool heating
- Works already at 10°C outside temperature
- Titanium heat exchanger, resistant to erosion
- Max. pool size: 35,000 L
- Heating capacity 26°C: 7.0 kW
- Heating capacity 15°C: 4.8 kW
- COP value*: 6.6
- Connections: Ø 32 and 38 mm
- Incl. Ø 32 mm hose (1 x 2 m)
- Pump power: 3 - 4 m³/hour
- To connect the EasyHeat heat pump to your Ø 32 mm swimming pool and filter pump, you do not need a connection kit or extra parts. Super easy!
- To connect to a Ø 38 mm pool and filter pump, you only need the connection kit for pool heating .
EasyHeat series
The EasyHeat heat pumps are the simplest of the Comfortpool heat pumps, and especially suitable for "smaller" swimming pools. An EasyHeat heat pump is very easy to connect, and you don't need any extra parts for this! Just connect the pool hoses, plug it in and it can start heating your pool. Using the EasyHeat heat pump is also very simple and is done via a practical and clear display.
How does the heat pump work?
A refrigerant flows in the heat pump and this refrigerant absorbs heat from the outside air. It can always extract useful heat from the air, even when it is still quite cold outside. The refrigerant thus becomes hotter and evaporates into a gas. This gas then flows into the compressor where it is compressed (gas under high pressure becomes very hot). The heated gas then flows along the pipe with cold pool water, the water is heated and then flows back into the pool nice and warm. Meanwhile, by releasing its heat into the pool water, the refrigerant cools down and becomes liquid again, after which the whole process starts again.
Efficient, energy-efficient pool heating
The heat pump uses the heat that is already in the outside air, which makes it a very energy efficient way to heat the pool. More economical than, for example, electric pool heating, more efficient than solar heating. With a heat pump, the ratio between the energy the heat pump consumes and the heat it produces is very favorable. In short, you get about 80% heat for free from nature, and you buy 20% heat; high yield! A heat pump is an efficient and economical way to heat your pool.
Power consumption
It is difficult to say how much electricity the EasyHeat heat pump actually uses from day to day, as this depends on many factors such as the size of the swimming pool, the outside temperature, the use of an insulating cover, the distance between the heat pump and the pool, etc. But in short you can say : heating 1000 liters of water to 1°C costs approximately 1 kW.
Is the EasyHeat heat pump suitable for my pool?
Whether and which EasyHeat heat pump is suitable for your pool depends mainly on the size of the pool. The heat pump must have sufficient capacity to efficiently heat all the pool water. The table below contains the most important data for all heat pumps from the Comfortpool EasyHeat series. Pay particular attention to the heating capacity and the maximum pool size . Overcapacity of the heat pump is of course always permitted, but undercapacity is not recommended. Immediately check the minimum pump power to see if your filter pump is strong enough for the heat pump you choose.
| Specification | EasyHeat 3 | Light heat 5 | Light warm-up 6 |
|---|---|---|---|
| Recommended pool size | 5000 - 10,000 litres | 8,000 - 18,000 litres | 12,000 - 35,000 litres |
| Pump power | 1 - 2 m³ per hour | 2 - 3 m³ per hour | 3 -4 m³ per hour |
| Heat capacity at 26°C | 3.3 kW | 5.8 kW | 7.0 kW |
| Heat capacity at 15°C | 2.2 kW | 3.8 kW | 4.8 kW |
| COP value at 26°C | 5.5 | 6.5 | 6.6 |
| COP value at 15°C | 4.1 | 4.5 | 4.7 |
| Sound level (at 10 m) | 36dB | 37dB | 39 dB |
| Sound level (at 1 m) | 56dB | 57 dB | 59dB |
* The COP value describes the energy consumption and efficiency of a heat pump. A COP of 3 means that the heat pump can emit 3 kW of heat with 1 kW of energy.
| SKU | CP-16015 |
|---|---|
| Color of the product | gray |
| trademark | Comfort pool |
| Model | EasyHeat 6 |
| Suitable for | Swimming pools up to 35,000 litres |
| Weight | 38 kg |
| Dimensions (LxWxH) | 48 x 45 x 50 cm |
| Package size | 51 x 48 x 53 cm |
| Guarantee | 2 years |
Pay With Klarna
Pay now, later or split with Klarna!
High quality
Quality guarantee.
Delivery time
Delivery within 2-4 days with DHL, UPS & PostNord
Returning
14 Days Open Buy
