Description
The Intex salt water system is the perfect way to keep your pool water clean, clear and hygienic all summer long . The salt water system disinfects the water naturally, without the use of chemicals. Fill the pool, add salt and the saltwater system will do the rest! This medium salt water system is suitable for swimming pools with a capacity of up to 26,500 litres. Bigger pool? Then choose the large version of the salt water system.
With the Intex salt water system you don't need chlorine, the system converts the added salt into natural chloride that kills bacteria, fungi and algae. The salt water system has a disinfecting effect just like chlorine, but without the irritating drawbacks. No expensive chlorine tablets, no stinging eyes and no chlorine smell. With the salt water system, the amount of salt in the pool water is minimal, only 10% of the salinity of sea water, you can barely taste it!
- No chlorine smell
- No bleached swimwear
- No harmful chemicals
- No need for expensive chlorine tablets
- Works fully automatically
- Simple installation
- Dimensions: 55 x 35 x 29 cm
- Max. pool capacity: 26,500 L
- My. pump capacity: 2650 L/h
- Connection: Ø 32 / 38 mm
- Max. chlorine production: 5 g per hour
- Built-in inverter 220 V > 12 V
- liters of water x 0.003 = number of kg of salt
A 10,000 L swimming pool therefore requires (10,000 x 0.003) 30 kg of salt
How does it work?
When you add salt to the pool, the salt water system converts this salt into chloride, a natural form of chlorine. The chloride flows back into the pool, killing the bacteria there and disinfecting the water. Chloride has basically the same effect as chemical pool chlorine, but is completely natural and safe for swimming. With a salt water system, you have a pool full of clean and fresh water, without the disadvantages of pool chlorine or other chemicals.
ECO technology
Unique to Intex saltwater systems is the special EKO (Electrocatalysis Oxidation) technology. This technology breaks down the water molecules in the pool water into very powerful oxidants that destroy water contaminants such as algae and bacteria, resulting in clear and clean water. This ECO process is so efficient that the amount of chloride that needs to be produced to keep the water clean is reduced by as much as 60%! So you need much less salt than with any other salt water system.
Simple and practical
The salt water system is a very simple way to keep your pool clean. The system needs to run for a few hours per day, so you can use the timer function to turn the system on and off automatically. You can even run the salt water system overnight so you can splash in a clean pool in the morning! Salt only needs to be added once or twice per season, and the system itself indicates when this is necessary. So just set it properly and you don't have to worry about it anymore.
Installation of the salt water system
The salt water system can easily be placed between the filter pump and the pool. Everything is included, all you need is a screwdriver! Thanks to the included adapter, the salt water system fits both Ø 32 mm and 38 mm connections. Two things are important when installing the saltwater system: the pool pump must be strong enough to pump the water through it (min. capacity: 2650 L/hour). And if you heat the pool with solar heat, the salt water system must be installed last in the series to prevent gas formation in the solar collector or solar sphere.
How much salt do I need?
The amount of salt you need when filling the pool can be calculated with a simple calculation: pool volume (in liters) x 0.003 = number of kg of salt. You don't need to add salt again and again. The salt water system continuously produces new chloride from the salt in the water (which is then automatically converted to salt). The only salt that disappears from the water is what splashes over the edge when you swim. If you need to add a little extra salt once, the salt water system will indicate this itself.
*Make sure you use only pure salt (99.8% sodium chloride), without iodine or other minerals. Only fill the pool with tap water, using rain or ground water will damage the salt water system.
| SKU | 26668GS |
|---|---|
| Color of the product | gray |
| trademark | Intex |
| Model | Krystal Clear Saltwater System - QS500 |
| Suitable for | Pools up to 26,500 L |
| Weight | 10.5 kg |
| Including pump | No |
| Dimensions (LxWxH) | 55 x 35 x 29 cm |
| Package size | 55 x 35 x 29 cm |
| Guarantee | 2 years |
Pay With Klarna
Pay now, later or split with Klarna!
High quality
Quality guarantee.
Delivery time
Delivery within 2-4 days with DHL, UPS & PostNord
Returning
14 Days Open Buy
